To create a port forward entry in your Arris SBG6700-AC router, follow these steps:

• On the Local IP address, enter the IP address receiving the forwarded ports. This could be the IP address of your computer or another device within your network.
• For single port forwarding, enter the port number in both the End Port/Local Start and End Port/External Start boxes.
• When forwarding many ports, enter the least number in the left-hand End Port/Local Start and End Port/External Start boxes and the highest number in the right-hand End Port/Local Start and End Port/External Start boxes.
• On the Description box, input any name to remind you why you are forwarding these ports.
• On the Protocol box, select the protocol, whether TCP or UDP or Both.
• Select On from the Enabled dropdown
• Click the Apply button to open the ports and test them.

Find The Port Forwarding Section

To find your Netgear C3700 router port forwarding section, go to the first page in your router proceed as follows:

• Open a new menu by clicking the Advanced button
• Click Advanced Setup on the new menu
• Click Port Forwarding/Port Triggering
• Click the Add Custom Service button

From the Custom Service page, you can create a port forward entry by following these steps on Arris NVG589:

• Enter a name in the Service Name to remind you why you created this port forward entry.
• Enter the port number in both the left and right Global Port Range boxes if you are forwarding a single port. For a range of ports, input the least number into the left Global Port box and the largest number into the right Global Port box.
• Type the port to forward in the Base Host Port
• Select the protocol in the Protocol dropdown.
• Once you finish the above process, click the Add button and test your ports to ensure they are open.

To create a port forwarding entry on your Arris TG1672 router, follow these steps:

• Select Add New/Create tab on your router
• Enter a name on the Description/ Application name. This name serves as a reminder of the reason for the forward.
• Input the static IP address of the device receiving the forwarded ports
• Enter the ports you are forwarding in the Global Port Range boxes.
• Select the protocol, whether TCP, UDP, or Both, in the Protocol dropdown.
• In case you see the External IP addresses field, input 0.0.0.0 in it.
• Select the Enable checkbox if available on your router
• Once you finish, click Save to enable port forwarding on your Arris TG1672G router.
• After creating the port forward entry, test it to ensure the ports are open.

Create A Port Forward

Port Forward Arris TG862? Create a port forward entry, follow these steps:

• Select Other in the Services Name
• Input a name in the Other Service box as a reminder of the reason behind this entry creation.
• Input the IP address in the Server IP address box. This IP address can be your computer or other devices within your network receiving the forwarded ports.
• For single port forwarding, enter the port number in the Start Port and End Port boxes.
• For a range of ports forwarding, enter the lowest number in the Start Port box and the highest number into the End Port box.
• Click the Save button after inputting all the entries.
• Finally, test your ports to check whether the ports forwarded correctly.

To find the port forwarding section of your Arris NVG599 router:

• Click the Firewall tab on the Device Status page.
• From the options listed on the Firewall page, select the NAT Gaming option.
• At the center section of the NAT Gaming page, click the Custom Services tab.

Your Arris TG2482A router has a web interface. Thus, to log in, you need a web browser such as Chrome, Firefox, or Edge. On your choice browser, find the address bar and replace it with your Arris TG2482A default IP address, 192.168.0.1, then press Enter. This action will open a screen prompting you to enter your login credentials. Input Username: admin and Password: password, which are the Arris TG2482A default credentials and press Enter to log in.

Create A Port Forward Entry

To create a port forward entry on your Arris TG1670A router, select the ADD tab on the port forwarding section and proceed as follows:

• Enter a name in the Description field to remind you why you created this port forward entry.
• Input the inbound port for the Virtual server in the Inbound Port Field. The range of the inbound port field should match that of the Local Port field.
• Use the dropdown in the Format Field to set the format to TCP, UDP, or Both.
• Enter the IP address of the device you are forwarding the port to in the Private IP Address field.
• Enter the local port address in the Local Port field. This address should be of the same range as the Inbound Port Field.
• Once you finish the above set up, click Add Virtual Server to configure the Port Forward.
• You can now test your ports to check whether they are open.

Create the Address Objects

To create the address objects on your router to port forward Sonicwall:

• Log in to your SonicWall GUI
• On the top navigation menu, click Object
• Click Match Objects/ Address
• Click the Add a new Address Object and create the Server’s Private IP and Server’s Public IP Address Objects.
• Add the new Address Objects to SonicWall’s Address Object Table by clicking the Save tab.

How To Port Forward ARK

The following comprises a step by step process on how to port forward ARK:

• Enter the IP address of your router.
• Log in to your router. Most routers use a web interface that requires a web browser for you to access their pages. Depending on the brand you are using, open your chosen browser, either Chrome, Firefox, or Edge, and enter the admin credentials to log in.
• Find the port forwarding section on your router home page
• Click on Configure Port Forwarding to create a port forward entry
• Enter a name in the Service name to remind you of the reason behind the creation of this forward entry.
• Input the TCP and UDP port numbers accordingly for single ports and range of port forwarding
• Select or Type in the IP address of your device.
• Click OK once you are done.